Posted on 0 comments

t&g bluetooth speaker manual

Welcome to the T&G Bluetooth Speaker Manual. This guide helps you understand your portable speaker’s features, including Bluetooth 5.0, TWS mode, and built-in microphone. Enjoy your audio experience.

Product Specifications

The T&G Bluetooth Speaker features Bluetooth 5.1, a 10-meter range, 10W speaker, and a 1200mAh battery. It weighs 750g and includes a USB cable, AUX cable, and manual.

2;1 Bluetooth Version and Range

The T&G speaker uses Bluetooth 5.1 technology, offering a stable wireless connection up to 10 meters. This ensures high-quality audio streaming from compatible devices like smartphones or tablets.

2.2 Technical Parameters (Drivers, Battery, etc.)

The T&G speaker features a 1 full-range driver, delivering clear and powerful sound. It has a 1200mAh battery, providing up to 2 hours of playtime on a full charge. The speaker supports USB charging and includes an AUX input for wired connections. A built-in microphone allows for hands-free calls, enhancing versatility. The compact design weighs 750g, making it portable and easy to carry. Additional features include FM radio and support for microSD and USB cards, ensuring diverse music playback options. These specifications make the T&G speaker a robust choice for both indoor and outdoor use.

Unboxing and Accessories

Inside the box, you’ll find the T&G Bluetooth speaker, a USB charging cable, an AUX input cable, and a convenient carrying strap. Also included is a detailed user manual and the speaker’s original packaging. These accessories ensure you have everything needed to start using your speaker right away. The USB cable allows for easy charging, while the AUX cable provides a wired connection option. The carrying strap enhances portability, making it simple to take your speaker on the go. The manual offers step-by-step instructions for setup and operation, ensuring a seamless experience with your new device.

Charging the Speaker

To charge your T&G Bluetooth speaker, locate the micro USB charging port on the speaker. Connect one end of the provided USB cable to this port and the other end to a compatible charging adapter or USB port. The speaker will indicate it is charging with a red LED light. Charging time typically takes 2-3 hours for a full charge, depending on the power source. Once fully charged, the red light will turn off. For optimal performance, charge the speaker when the battery is low, indicated by a tone alert. Avoid overcharging to prolong battery life. Always use the provided USB cable for safe and efficient charging.

Bluetooth Pairing

To pair your T&G speaker, turn it on, enable Bluetooth on your device, select the speaker’s name from the list, and wait for the LED to turn blue, indicating a successful connection.

5.1 How to Pair with Smartphones

To pair your T&G Bluetooth speaker with a smartphone, turn on the speaker and enable Bluetooth on your phone. Open your device’s Bluetooth settings, locate the speaker’s name (e.g., “TG-XXX”), and select it. Once connected, you’ll hear a confirmation sound, and the LED indicator will turn blue. For troubleshooting, restart the speaker or reset it by pressing and holding the power button for 10 seconds. Ensure your smartphone is within the 10-meter Bluetooth range for stable connection. This process works seamlessly with both Android and iOS devices, providing a smooth wireless audio experience.

5.2 How to Pair with Tablets and Computers

Paring your T&G Bluetooth speaker with tablets and computers is straightforward. Enable Bluetooth on your device and ensure the speaker is in pairing mode. For tablets, go to Bluetooth settings, select the speaker’s name, and confirm pairing. On computers, navigate to Bluetooth settings in the control panel, locate the speaker, and follow on-screen instructions. A connection confirmation will be indicated by a sound or LED light. If issues arise, restart both devices or reset the speaker by pressing the power button for 10 seconds. Ensure your device and speaker are within the 10-meter range for optimal connectivity. This ensures a seamless wireless audio experience across all compatible devices.

Using the Speaker

Control your T&G speaker with ease. Use the play/pause button and volume controls for seamless audio management. Switch modes like Bluetooth, AUX, or TWS effortlessly, ensuring optimal sound quality.

6.1 Play/Pause and Volume Controls

Your T&G Bluetooth speaker features intuitive controls for seamless music management. Press the play/pause button once to pause or resume playback. For volume adjustments, press and hold the volume up or down buttons until you reach your desired level. The LED indicator will flash blue during volume changes, ensuring you’re aware of adjustments. When connected via Bluetooth, the speaker will automatically pause playback when disconnecting from the source device; To avoid distortion, ensure the volume on both the speaker and the connected device is set to a moderate level. This feature enhances your listening experience, allowing you to enjoy your music effortlessly. Proper use of these controls ensures optimal sound quality and longevity of your speaker.

6.2 Switching Between Modes (Bluetooth, AUX, etc.)

To switch between modes on your T&G Bluetooth speaker, press the “M” button located on the control panel. Each press cycles through the available modes: Bluetooth, AUX, and USB/TF card (if applicable). The blue LED indicator will flash to confirm the mode change. When in Bluetooth mode, ensure your device is paired correctly. For AUX mode, connect your device using the provided 3.5mm AUX cable. If your speaker supports USB or TF card playback, insert the media and press the “M” button until the USB/TF card mode is selected. To reset the speaker, press and hold the “M” button for 3 seconds. This feature allows seamless transitions between different audio sources, enhancing your listening experience with flexibility and convenience.

Troubleshooting Common Issues

If your T&G Bluetooth speaker is not functioning properly, try these solutions. For connectivity issues, restart both the speaker and your device, ensure Bluetooth is enabled, and check that they are within range. If the speaker is not charging, verify the charging cable and port are clean and functioning. Use the original charger for best results. If the sound is distorted, ensure the volume is balanced on both the speaker and the connected device. For pairing problems, reset the speaker by pressing and holding the power button for 5 seconds. If issues persist, refer to the warranty information for further assistance. Regular maintenance and updates can also resolve unexpected malfunctions.

Warranty Information

Your T&G Bluetooth speaker is backed by a limited warranty covering manufacturing defects for a period of 6 months from the date of purchase. During this time, defective products will be repaired or replaced free of charge. To claim warranty, ensure the product is registered and proof of purchase is provided. Damage caused by misuse, accidents, or unauthorized modifications is not covered. For more details, contact the authorized service center or refer to the warranty card provided with your purchase. Regular maintenance, as outlined in this manual, can help extend the product’s lifespan and ensure optimal performance under warranty conditions.

Maintenance and Care Tips

To ensure your T&G Bluetooth speaker performs optimally, regular maintenance is essential. Clean the speaker grille gently with a soft cloth to remove dust and debris. Avoid exposing the speaker to water or extreme humidity, as this may damage internal components. For tough stains, use a lightly dampened cloth but avoid harsh chemicals. Store the speaker in a cool, dry place when not in use. Charge the battery periodically to maintain its health, even if the speaker is not in use. Avoid overcharging, as this can reduce battery lifespan. Update the speaker’s firmware if available, following the instructions provided in the manual. Proper care will extend the speaker’s lifespan and ensure consistent performance.

Additional Features

Explore advanced functionalities like TWS mode for stereo sound and a built-in microphone for hands-free calls. These features enhance your audio experience with convenience and quality.

10.1 TWS Mode

TWS (True Wireless Stereo) mode allows you to pair two T&G Bluetooth speakers wirelessly for a synchronized stereo sound experience. This feature creates a wider soundstage, enhancing your audio immersion. To activate TWS mode, ensure both speakers are powered on and in pairing mode. The speakers will automatically detect each other and pair within a few seconds. Once connected, you can enjoy a balanced and immersive sound output, perfect for parties, outdoor events, or home entertainment. The TWS mode works seamlessly with Bluetooth 5.0, ensuring a stable and high-quality connection between both speakers.

10.2 Built-in Microphone

The T&G Bluetooth speaker features a built-in microphone, enabling hands-free calls and voice command functionality. When connected to your smartphone, you can answer or reject calls directly from the speaker. The microphone ensures clear audio quality, making it ideal for conferences or casual conversations. Additionally, you can use voice assistants like Siri or Google Assistant by pressing the multi-functional button. The microphone also supports noise reduction, minimizing background interference for a clearer listening experience. This feature enhances the speaker’s versatility, transforming it into a convenient communication tool alongside its primary function as a high-quality audio device.

Leave a Reply